Compact Digital Metal Separators

There are two compact digtial metal separators with detector coil diameters ranging from 50 to 70 mm.

Special Features We Also Offer:
  • High quality construction [stainless steel reject flap]
  • Compact and rugged design
  • Simple commissioning and operation
  • Digital evalutation electronics
  • Rreliable metal separation
  • More than 13 years proved at the market.
  • Superior customer service.
  • Short delivery times for spare components, wear parts and new drives.
  • Competent assistance during planning and
  • Expert assistance during planning and consultation on site by one of our sales representatives.
  • Workout of customized solutions for the highest sensitivity.
  • Excellent quality and more than 35 years of age experience.
  • Maintenance service on factory mostly within one week
  • First class reference assests.
  • A wide range products with many applications.

Model Number 50 70
Mechanical Details
Installation height (include inlet flange) 365.50 [400] mm
Clear width inside protection tube 45 mm 65 mm
Free diameter of the detection coil 50 mm 70 mm
Weight of device (approx) 20 kg
Load bearing capacity of the housing <150 kg
Flap Material Stainless steel
Housing Material Aluminum casting and stainless steel
Protection Tube Material [optional] Pnenolic resin, ceramics, glass
Gasket Material Linatex
Housing fractional coated in RAL 5005
Protection class [higher available on request] IP 50

Application Conditions
Material throughput depends on the properties of material and complete conveyor system < 2000 I/h <3900 I/h
Max. drop height of the bulk material 0 - 600 mm
Max. permissible temperature 80 °C
Max. temperature of the housing 0 - 60 °C
Properties of the bulk material dry & flowable
Sensitivity Adjustable Maximal (no product effect assumed)
At the edge of detector [Ferrous/Alu/Stainless steel ball in mm] app. 0.5/0.8/1.0 app. 0.7/1.0/1.2
Sensitivity is adjustable by Multifunctional panel
Mode of operation of evaluation electronics digital
Mode of operation of ring detector Transmitter - Receiver
Main Connections -
Operartional voltage 230 V/50 Hz
Compressed air supply 4 - 6 bar, filtered, free of water and oil
Power consumption <25 VA
3 m Connecting cable L1/N/PE*1.5 mm2
Inputs Test button
Output signals -
Transistor output Metal Detection 24 V/20 mA
Power supply for periphery 24 V/100 mA
Metal Detection/breakdown - power supply 2 * 250 V/5A
Optional Test button
Flap in position not-good, if air pressure fails or power supply fails [Option No. 40]; protection class IP 54 [Option No. 54]

Contact us today: - Tel: 973.227.0700

We accept the following major credit cards:

Plastic Process Equipment

Plastic Process Equipment

23 Spielman Road, Fairfield, New Jersey, USA, 07004-6155
Tel: 973.227.0700 ~ Fax: 973.227.7307 ~ Email: